A fresh look at light: build your own spectrometer


Take a CD and a cereal box, and what do you have?  With a little help from Mark Tiele Westra, your very own spectrometer! Time to explore the delights of colour, hidden in the most prosaic of objects.


Image courtesy of National Optical Astronomy Observatory/Association of Universities for Research in Astronomy/National Science Foundation

A high-resolution version of the solar spectrum, showing a great multitude of Fraunhofer lines. The wavelength increases from left to right, then bottom to top


White light is not actually white – it consists of many different colours.  The composition of light – its spectrum – is studied by a device called a spectrometer.  In this article, we describe how one can build a fully functioning spectrometer with little more than a cereal box and a compact disc.  We will use the do-it-yourself instrument to marvel at the wonderful world of hidden colours behind everyday household objects such as light bulbs, fluorescent lights, computer monitors and candle flames.  Let’s explore!


How to separate light

There are different ways to split white light into its different colours.  One way is to use a prism, like Newton did.  Due to variations in refractive index, different colours follow distinct paths through the prism, causing the colours to separate.  Another way is to use a so-called diffraction grating, which consists of a large number of tiny grooves, placed parallel to each other on a surface, as shown below.  The interaction of the tiny grooves with the light waves leads to the different colours being reflected in different directions.  It is very fortunate that everybody has high-quality diffraction gratings at home: compact discs (CDs).  The beautiful colours that can be seen when light reflects off the surface of a CD are a clear indication that it acts like a diffraction grating.  But why?  The illustration above shows what a strong magnification of the surface of a CD would look like.  The music is encoded in short and long pits, which are placed in a long spiral groove on the surface of the CD.  The grooves, which are spaced just 1.6 μm (1600 nm) apart, act as a grating.


Image courtesy of Mark Tiele Westra

A prism separates white light into its constituent colours

Image courtesy of Mark Tiele Westra

A 6250-fold magnification of the surface of a compact disc




Constructing a cereal-box spectrograph

We can make good use of these household diffraction gratings for constructing our own spectrometer.  It consists of two important elements: a CD, which separates the light into its different colours, and a narrow slit on the opposite side of the box which produces a narrow beam of light.  The slit is constructed on one side of the box using some thick paper and duct tape.  A slightly fancier model can be made using the two small blades from a disposable razor, which are taped down with the sharp edges facing each other, as shown in the picture.


Construction of the cereal-box spectrometer.  The CD

is placed at a 60° angle to the bottom of the box


If the slit is too broad, the spectrum will be blurred, and if it is too narrow, the spectrum will be too dim.  A width of 0.2 mm seems to work well, but one can experiment.  The quality of the spectra obtained is dependent on the quality of the slit, so it should be constructed with care.  On the other side of the box, a CD (the author used an empty rewritable CD) is mounted at a 60° angle to the bottom of the box. On top, a hole is cut, through which the CD can be observed. Stray light is excluded from the box by covering any holes around the CD, as well as the edges of the CD, with dark tape.


Image courtesy of Mark Tiele Westra

The spectrometer constructed by the author.  The bottom-right

picture shows the slit constructed from razor blades


To observe a spectrum, the slit is pointed towards a source of light (the closer the better), and the investigator looks down through the hole on top.  Move the box around a little to get a feel for what to look at.  Photos of the observed spectra can be made using a simple digital camera, with ‘macro’ capability for close-up focus, attached to the box by tape or rubber bands.  The camera should preferably have manual focus, as it can be difficult to get sharp spectra with auto-focus.


Image courtesy of Mark Tiele Westra

1. Spectrum of an incandescent light bulb

2. Spectrum of an ordinary fluorescent light

3. Spectrum of a fluorescent light using tri-colour phosphors. Due to

overexposure by the camera, some of the lines appear to have a slightly different

colour to that which they really have.  The bright yellow line in the red

part of the spectrum should be red as well

4. The spectrum of a laptop screen



Time to experiment!  Our first attempt is to look at the spectrum of an ordinary incandescent light bulb.  The result is shown above.  We see a nice, continuous spectrum, with all the colours of the rainbow. In a light bulb, light is produced by a very hot filament of metal.  Secondly, we look at two different fluorescent lights, which both emit white light.  The first, which is an ordinary fluorescent light, shows a number of sharp lines against the background of a continuous spectrum.  These emission lines (see text below) are produced by low-density mercury vapour in the tube.  The mercury also produces ultraviolet light, which is turned into a continuous spectrum of visible light by a thin layer of phosphor on the inside of the tube.  The second fluorescent light shows a very different spectrum.  The reason is that manufacturers can vary the colour of the light by using different combinations of phosphors.  The lamp illustrated uses a phosphor that emits a continuous spectrum, but this type uses so-called tri-colour phosphors: a combination of three phosphors which each has its own set of emission lines.  We perceive the resulting mix of colours as white.  A small section of the screen of a laptop showing a white Word document produces the spectrum shown above.  The three pixel colours that make up the image – red, green and blue – are very distinct.


How spectra are formed

Some of the spectra that can be seen with the cereal-box spectrometer have a continuous background, with the colours varying smoothly from dark red to dark blue.  Others consist of sharp lines on a continuous background,  sharp lines without background,  or even dark lines on a continuous background, like in the solar spectrum (see right).  Why all this diversity? How are spectra formed?  It is all due to the atoms.  An individual atom can find itself in different energy states, depending on whether its electrons occupy their usual orbits or have been excited to higher orbits.  An atom cannot have just any energy: the energy levels are sharply defined, dictated by the detailed atomic structure.  When an electron jumps from one orbit to another, the change corresponds to a precise amount of energy which is emitted in the form of a single photon.  The energy of the emitted photon determines its colour.  Because many different jumps are possible, each atom can emit a range of distinct colours of light.  If this light is separated by a prism or a diffraction grating, each colour is visible as an emission line in the spectrum, which is itself called a line spectrum.  To demonstrate the formation of an emission line, we look at what happens when some ordinary table salt (sodium chloride, NaCl) is put in a candle flame.


Image courtesy of Mark Tiele Westra

The three types of spectra and their origin. Solids, fluids and high-pressure gases emit

a continuous spectrum (top). A low-density hot gas (middle) emits a line spectrum.

Finally, when light with a continuous spectrum passes through a low density cold gas,

specific colours of light are absorbed, leaving dark lines in an absorption spectrum


The upper pictures show the continuous spectrum of the flame itself, just like that of an incandescent light bulb.  When a little table salt is put on a knife and held in the flame, a distinct orange line appears in the spectrum, which corresponds to the emission line of sodium (Na, at 589 nm).  An atom not only emits light, but also absorbs photons of the same energy that it emits.  If light passes through a cold, low-density gas of atoms, the atoms in the gas absorb specific frequencies causing dark lines in the spectrum, which are called absorption lines.  But if all spectra are formed by atoms emitting sharply defined colours, how are continuous spectra formed?  For a single atom, unaffected by external influences, the lines are indeed sharp.  This is the case in a low-density gas such as in a fluorescent tube.  In a higher-pressure gas, such as the Sun, and also in fluids and solids, there are frequent collisions and many other mechanisms that cause the lines to lose their sharpness and become fuzzy, leading to a continuous spectrum.  The three types of spectra are summarised in the illustration above.


Image courtesy of Mark Tiele Westra

A little table salt held in a candle flame

produces a sodium emission line


Different atoms (and molecules) have different emission and absorption spectra.  This difference can be exploited: just by looking at the light that comes from a distant object, for example the Sun or a star, we can tell which chemical elements are present.  On Earth, this technique is used by shining light through a sample (often a gas) and measuring the absorption spectrum, from which the composition of the sample can be derived.


Image courtesy of Mark Tiele Westra

The spectrum of the Sun as seen with our cereal-box spectrometer.

The lines correspond to: (1) hydrogen at 656 nm, (2) sodium at 589 nm,

(3) iron at 527 nm, (4) magnesium at 518 nm, (5) hydrogen at 486 nm,

and (6) iron and calcium at 431 nm


The solar spectrum

Taking our spectrometer outdoors, we can look at the spectrum of sunlight.  The spectrum, shown above, looks continuous at first glance.  But if we take a closer look, several dark lines can be identified, which are caused by the absorption of specific frequencies of light by atoms in the outer layers of the Sun, and in Earth’s atmosphere.  The image above does not do justice to the full capabilities of the cereal-box spectrometer: with the naked eye the absorption lines can be seen in much greater detail.  The absorption lines that we observe in the solar spectrum have a name: Fraunhofer lines.  Joseph von Fraunhofer (1787-1826) was the first to make a systematic study and careful measurements of these dark lines, although he was not the first to observe them.  In all, he mapped over 570 lines, which he categorised and named.  Around 1860, Kirchoff and Bunsen discovered that each chemical element is associated with a set of spectral lines.  They deduced that the Fraunhofer lines in the solar spectrum were caused by the absorption of specific colours of light in the outer layers of the Sun.  Some of the lines are also caused by the absorption of light by atoms in the atmosphere of Earth, such as oxygen.  The study of these lines eventually led to the discovery of the element helium in the Sun, which ultimately provided proof that the Sun is powered by nuclear fusion.



I am indebted to Xiaojin Zhu of the University of Wisconsin-Madison, whose website (www.cs.cmu.edu/~zhuxj/astro/html/spectrometer.html) provided me with all the information I needed to construct my own spectrometer and to interpret the results.  On his website more spectra are available.  Also thanks to Bartjan van der Meer, who put me on the trail of this fantastic science project.



Wikipedia article on the visible spectrum:  http://en.wikipedia.org/wiki/Visible_spectrum


General info on spectra

Wikipedia article on the electromagnetic spectrum: http://en.wikipedia.org/wiki/Electromagnetic_spectrum

Wikipedia article on spectroscopy: http://en.wikipedia.org/wiki/Spectroscopy

Wikipedia article on the Fraunhofer lines: http://en.wikipedia.org/wiki/Fraunhofer_lines

Wikipedia article on the emission lines: http://en.wikipedia.org/wiki/Emission_lines


Mark Tiele Westra is the Public Information Officer at the FOMInstitute for Plasma Physics Rijnhuizen, the Netherlands.


This article describes a very interesting hands-on experiment that can easily be replicated in class or at home.  The spectrometer is constructed from common materials and is used to show the colour composition of white light and to compare the spectra of many light sources.  Of particular interest is the historical background to the discovery of the light spectrum of the Sun and how it was used to identify the composition of its gases.  The article links physics and chemistry and would be interesting to both secondary school and university students.

Gaetano Bugeja, Malta




This article was first published in 'Science in School', a European journal to promote inspiring science teaching. Westra, M. T. Science in School, 2007, 4, 30-34.  (http://www.scienceinschool.org/2007/issue4/spectrometer)